FASTPCBA


  • English
Email:pcba23@pcb-smt.net

Surface mount component package category

The package structure of SMD components is the basis of process design. According to the structure of pins or solder joints, it can be divided into: Chip type J-shaped pin type, L-shaped pin type, BGA type, BTC type, castle type.

Surface mount component package category


The package structure of SMD components is the basis of process design. According to the structure of pins or solder joints, it can be divided into: Chip type J-shaped pin type, L-shaped pin type, BGA type, BTC type, castle type. The electrodes of the surface-assembled components are soldered ends, and some are pins, which can be collectively referred to as electrodes.


20 years pcb factory

1.Chip package

A. Chip resistor

The chip resistance welding end plating layer is generally three layers, that is, the bottom layer of Ag or Ag-Cr/Ni/sn.


B. Chip capacitor

The chip capacitor solder end plating is generally three layers, that is, the bottom layer Ag or Cu/Ni/Sn. The bottom layer plating depends on the internal electrode plating. If the internal electrode is Pa or Pd-Ag, the bottom plating layer select Ag: if the internal electrode coating is Ni or Cu, and the bottom coating is Cu.


2.SOP, QFP package

The SOPOFP package is a leaded package. The lead frame is mostly made of copper alloy or iron-nickel alloy. The lead plating is usually a three-layer structure.

advanced pcb machine

3.BGA package

BGA-type solder balls use alloys that are consistent with common solders. Currently, they are mainly SAC alloys such as SAC305 and SAC405.

pcb factory exhibition

4.QFN package

The QFN package lead frame material is generally copper, and there are various kinds of soldering end plating, mainly based on the process of the internal electrode. 0.4mm pitch and below, the coating is NiPdAu; the spacing is larger than 0.4mm. Using Sn or Sn-Ag.

cooperate pcb customer an supplier

5. Plug-in package

Plug-in package leads mainly use Sn, Sn-Bi, Sn-Ag-Cu and Ni-Sn.


Contact us

Online Inquiry

  • Full name:
  • Telephone:
  • Email:*
  • Address:
  • Please enter your message in the following areas:
  • Verification code: Verification code

Products related to this product / Related Products

HDI pcb board fabrication and assembly
HDI pcb board fabrication and assembly
HDI pcb board is widely used in the automotive electronics industry. HDI pcb board advantages are as below 1. Can reduce the cost of PCB: when the layers of PCB increases to more than eight layers, it is manufactured by HDI, and its cost is lower than the traditional complicated lamination process.
High frequency pcb is hot and trend in pcba industry
High frequency pcb is hot and trend in pcba industry
High frequency pcb are special circuit boards with high electromagnetic frequencies. Generally speaking, high frequencies can be defined as frequencies above 1 GHz.
Ceramic pcb manufacturer prototype and mass pcb production
Ceramic pcb manufacturer prototype and mass pcb production
Ceramic pcb have good high-frequency and electrical properties, and are ideal packaging materials for next-generation large-scale integrated circuits and power electronic modules.

Related information

Altogether-article comment【I want to comment】

正在加载...
I want to comment:  
*Content:
(Content up to 500 words, 1000 characters)
Verification Code: Invisibility?!
 

FASTPCBA Technology Co.,Ltd

  • 3/F. 1/B, 18-2 Yuquan East Rd. Yulv Village.
    Guangming New district. Shenzhen. China.
  • T:400-930-9399 F:86-0755-26978080
  • pcba23@pcb-smt.net
Copyright © FASTPCBA Technology Co.,Ltd All Rights Reserved